Main Machine Configuration
 ■ Standard With Cnc Delem Netherlands Da52S（Basic configuration）
 ■ Bosch Germany Company Producing High-Performance Control Of Synchronous Servo-Hydraulic System
 ■ Detechtion With Scale To Synchronous Optical Position Feedback On Both Sides
 ■ Provided By Buyer’S Request Under The Series Of Workpieces With One Set Of Tooling
 Main Imported Accessories
 — CNC SYSTEM HOLLAND DELEM DA52S
 — HYDRAULIC SYSTEM GERMANY BOSCH
 — SCALES GERMANY
 –HIGH PRESSURE CLINE PUMP JAPAN NACHI
 — OIL TUBE CONNECTOR ZHEJIANG
 — CYLINDER SEALINGS IMPORTED FROM JAPAN

Technique Parameters Of Machine

Requirements Of The Machine Structure
1：The frame is split steel welding, parts assembly structure；

2：Rack, on skateboards and welding around wall panels shall be subject to full stress annealing treatment after the elimination of internal stress, and then processing the parts with a whole face, to ensure that the static accuracy of machine tools;

3：Paint the pieces before welding subject to the surface of sand blasting, surface clean-up level for Sa2.5 (GB8923-88), after the paint coating machine delivery, installation and commissioning at the scene after the paint surface. Nippon Polyurethane topcoat paint used, the color specified by the demand side;

4：Machine using the table plate thickening, and about the slider panel, so that the stiffness of an excellent machine, the machine synchronization and the use of skateboards positioning CNC electro-hydraulic servo position feedback system, which dynamically through Grating detected on both sides of the physical location of the slider, feedback to the CNC system, real-time precise control of the two main fuel tank trip (Y1, Y2-axis), so the slider can be promptly corrected the error on both sides of the synchronization and accurate positioning, so that the slider is completely contained in the case of migraine can be always maintained in parallel with the working platform and accurate positioning to ensure that the machining accuracy of machine tools.

5：3200 liters of hydraulic system uses a large volume tank, Germany imported original BOSCH company dedicated Bending Machine drive electro-hydraulic servo valves, imported from Japan Internal Gear Pump, Zhejiang Yonghua Company production pipeline joints, Japan NOK Waldorf card complete set of oil cylinder seals, high-quality Chinese-made motor. Compact hydraulic system, sealing performance, simultaneous high-precision, long service life, the eight-hour working system work properly. Hydraulic fluid tank with liquid thermometer. Smooth hydraulic cylinder action, non-impact, crawling phenomenon.

6：Electrical control system IS in line with international standards, safe and reliable, anti-interference ability,ELECTRICAL CONTROL CABINET equipped with Fan natural cooling device, the system with movable foot pedal operation, all electrical components use Schneider or SIEMENS products.

7:Upper and lower mold material good, long working life.

CNC System Features And Functions

DA52S CHARACTERISTICS

Integrated DA52S CNC system, not only can be applied to distorted synchronous bending machine control, can also be applied electric hydraulic synchronous bending machine control.
Based on 4 axis control panel installation structure, can be installed directly into electricity on ark, can also be installed in the suspension on the ark.
DELEM friendly user interface and the TFT true color LCD display DA – 52 s system, with all the basic functions of the bending machine control.Its unique way of “shortcuts”, provides a quick and simple programming.
The Angle of the Y axis programming and pressure control as standard.
DA – 52 s system based on the latest technology, with stable and reliable solutions.The USB interface of its configuration, bringing products and mould fast backup.
 ．A page type parameter programming quickly
 ．6.4″TFT，TRUE COLOR DISPLAY
 ．Navigation shortcuts
 ．THE MAX 4 axis control(Y1, Y2 and two additional shaft)
 ．The workbench deflection compensation
 ．Mold/material/product library
 ．USB interface
 ．Advanced Y axis control algorithm, can control closed loop, also can control open loop valve
 ．Panel installation structure, optional suspension box